The Decor Colors USA concrete look plater provides the much desired
stained and rustic concrete look finish to your decor. It is made with a
plaster ready to apply very easy and symple. It can be applied both
indoors and outdoors. It brings sophistication and modernity to your
property.
Yield:
47.40 lb (21.5 kg) container yield: up to 129 sqft with 2 coats
Drying time:
25 to 30 minutes per coat
1h to touch
Recommendation:
Indicated for drywall, repainting, over joint compound or spackling.
Benefits:
- Stained and rustic concrete look finish
- Ready to apply
Indication:
- Interior and exterior
Step by step application:
Step 1: First, the wall must be flat. If not it must be smoothed with
spackle or joint compound. If it is repainting and the paint is
semi-gloss or satin, it is necessary to sand with 220 grit sandpaper.
Step 2: Open the container, stir and apply the first coat with a
little product using a spatula, always making short movements and
leaving no excess.
Step 3: Wait for the first coat to dry and apply the second coat following “step 2” and wait for it to dry.
Attention:
- The perception of colors may vary according to several factors, such
as: batch, room dimensions, lighting, surface types and even the
different monitor resolutions can influence and distort tonalities.
Therefore, it is very important to remember that our virtual catalog is
only a reference, and there may be a difference between the colors shown
on the screen and the actual colors of the products sold.
- The colors can also vary according to the batches, so it is very
important if the continuation of the painting requires the same batch of
product.
- The product does not cover imperfections.
-Take care not to leave any relief, otherwise sand with 1200 final sandpaper.
