The concrete look plaster Pearly Finish brings a velvety look. It embodies sophistication with it's signature sparkle that is both discrete and elegant. Much used in modern decorations, it values your environment, with a lot of sophistication and modernity. With our premium colors, you can easily find the best one for your space. The application is very simple and practical, you can apply it yourself.
Yield:
3.5 lb (1.6 Kg) container yield: up to 75 sqft with 2 coats
7.0 lb (3.2 kg) container yield: up to 150 sqft with 2 coats
Drying time:
25 to 30 minutes per coat
1h to touch
Recommendation:
Indicated for drywall, repainting, over joint compound or spackling.
Benefits:
Applications for indoor and outdoor areas.
Step by step application:
Step 1: First, the wall must be flat. If not it must be smoothed with spackle or joint compound. If it is repainting and the paint is semi-gloss or satin, it is necessary to sand with 220 grit sandpaper.
Step 2: Open the container, stir and apply the first coat with a little product using a spatula, always making short movements and leaving no excess.
Step 3: Wait for the first coat to dry and apply the second coat following “step 2” and wait for it to dry.
Comments:
- Pearly Finish concrete look plaster does not accept sandpaper. Be careful to don`t leave high excess relief.
- The perception of colors may vary according to several factors, such as: batch, room dimensions, lighting, surface types and even the different monitor resolutions can influence and distort tonalities. Therefore, it is very important to remember that our virtual catalog is only a reference, and there may be a difference between the colors shown on the screen and the actual colors of the products sold.
- The colors can also vary according to the batches, so it is very important if the continuation of the painting requires the same batch of product.
