Di Marmo plaster 11 lb (5kg) Nero

Di Marmo - Italian marble effect It is a smooth coating that allows obtaining different effects in dry indoor areas.

Indication: Non-wettable internal surfaces and can be applied both on new surfaces, without painting, and on repainting. Base developed exclusively for Galvanized dyeing*

Surface preparation:

The wall must be clean and sanded, free of dust, grease, oil and/or moisture.
If you identify mold, wash with equal parts bleach and water solution.
If the wall is worn/disaggregating, scrape or brush the loose parts and previously apply a coat of wash primer.
If the wall is new concrete, wait for it to cure completely for 28 days before painting.
To level and prepare the surface, use joint compound and after a wash primer to receive de Di marmo plaster.

How to use:

Open the container and mix the product well before application, using a clean tool to avoid contamination. Fill the application tool (trowel or spatula) with a portion of the product and apply it on the surface, with the trowel at a 95° inclination, sliding along the wall, making long movements, until all the product is uniform. Remove excesses and level during application. After finishing the application, wait for it to dry.